H5608-3DFM-2D/3D microscope-Shenzhen Oseecam Technology Co., Ltd.

Product name: H5608-3DFM

Main characteristics
1. H5608-3DFM This 3D digital video microscope is based on an infinite optical system, with a continuous magnification range of 25-150 and a working distance of 30mm.
2. 3D rotating observer, 360 ° rotation, objective observation angle of 45 °, adjustable rotation speed, large depth of field range, high resolution, motor service life of 10000 hours.
3. Keep the center position consistent and continuously increase the magnification to produce clear images at each magnification.
3. The CCD interface is equipped with a fine-tuning device that can match any CCD camera without rotating the lens body and camera during fine-tuning.
4. The minimum magnification field of view can fill the camera's field of view without black borders, with high resolution and a large depth of field.
5. Equipped with a 1/1.8 "HDMI industrial camera, 4K 3840 * 2160 resolution, and optional 22 inch and 27 inch 4K HDMI high-definition display screens.
6. Widely used in industries such as microelectronics, precision electronics, precision hardware, deep hole walls, life sciences, animal and plant morphology, criminal investigation and identification, etc.

Image display
Information

Lens parameters	Variable magnification range	3.5-15X
	Magnification factor	25-150X
	Zoom ratio	1:7
	Operation mode	Electric mode
	motor speed	4r/min° ~2r/min°
	Motor service life	10000 hours
	Working distance	30mm
	Observation angle	45°
	view	4mm-20mm
	Interface	Standard C interface
Camera parameters	image sensor	1/1.8” SONY CMOS
	resolving power	3840 * 2160 60 frames
	Pixel size	2.0μm x 2.0μm
	white balance	Manual/Automatic
	exposure	Manual/Automatic
	Cross line	8 sets, position, color, angle, and scale (adjustable)
	Record format	Take photos, record videos, and transfer images to a USB drive Resolution: 3840 * 2160 Support USB storage, playback playback, etc
	Auxiliary functions	Support: Measurement of line width, measurement of font, graphic color, font color, calibration color, and other arbitrary adjustments
	measure	New measurement system, point spacing, rectangle, concentric circle, polygon, three-point circle, center distance, circle line distance, angle, radian, point line distance, parallel line, polyline (can only be measured in 2D state)
	Output interface	HDMI
Light source parameters	Regional control	Light source control, brightness adjustable from 0-100%
	Lighting method	Built in LED adjustable ring light
	Light color	Normal white
	Number of LEDs	30PCS LED
	illumination	Normal white 5500K color temperature
control	Direction control	Left/Right
	speed control	Fast/Slow
	Light source control	Strong/weak
Bracket parameters	Bracket	Rough adjustment bracket for round column
	plate size	380*260mm
	L mm	328mm
	Main pillar size	25mm